The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

JDM 5 speed AWD Transmission

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Beemer92

10+ Year Contributor
219
0
May 28, 2009
Peoria, Illinois
Need some help with this one. I'm getting a 5 speed AWD JDM Transmission. It comes with the following goodies: 5 speed awd transmission, clutch, flywheel, starter, and transfer case. All said parts are from a 95 - 98 donor from Japan. The car I have a a 95 Talon TSI AWD US Spec. The question I have is what JDM parts are compatible with the US Spec. All parts not used will be up for sale pending inspection. Thanks for the help everyone. I plan on purchasing this tranny later tonight or first thing in the morning. Thanks again. Josh
 
One thing to find out if you can before you place the order is the transmission VIN.. and if it has one. I have a JDM Trans for my 1G, however mine does NOT have a VIN on it. If you can locate the VIN you _should_ be able to determine what kind of gears, synchros, etc. it has internally.. Sorry I can't be more helpful, but perhaps these threads [RESOLVED] Transmissions (bar codes, serial numbers) and JDM 2G Manual AWD Transmisson's can be.
 
Last edited:
What jdm car is it out of because i know there is an issue with the ring gear and pinion ratios for the front diff with jdm trannys that doesnt match up with the us vehicles. The case may be that you will hafta swap out the ring gear for a 58 tooth gear, matching pinion, and speed sensor so that all four wheels are spinning at the same speed and speedo works in your 95.
 
What jdm car is it out of because i know there is an issue with the ring gear and pinion ratios for the front diff with jdm trannys that doesnt match up with the us vehicles. The case may be that you will hafta swap out the ring gear for a 58 tooth gear, matching pinion, and speed sensor so that all four wheels are spinning at the same speed and speedo works in your 95.

Like I had stated earlier, it's out of of 95 - 97 GSX/Talon TSI AWD with about 45k on it from Japan. I'll send them an email requesting the tranny vin. The only reason I am going with a JDM is cause it's cheaper than getting mine rebuilt. 1k for the jdm vs 2k to get mine redone. The only thong wrong with mine is 1st gear. All others are fine. Syncros I think.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

  • For sale 2g Black Box ECU
    Known working and Good Black Box ECU out of my personal 1998 GST. This ECU is completely stock...
    • JayyDSM_
    • Updated:
    • Expires
  • For sale 7 Bolt 4g63 Bare Block For Sale
    7 Bolt 4G63 Block With Girdle And Oil Pan
    • LSM
    • Updated:
    • Expires
  • For sale 420A Valve cover
    Powder coated candy red , used $60 located 91321 Santa Clarita California Can ship
    • Stizzydrew
    • Updated:
    • Expires
  • For sale 4G63 Antilag coil on plug, m&w ignition box, wilson Billet 90mm throttle body,
    I’m upgrading to fuel tech so I won’t have used for these parts I’m in the middle of a build and...
    • aguiga
    • Updated:
    • Expires
  • For sale 4G63 Pair of fog lights
    Pair of Fiat 500 fogs. Complete with mounting brackets and hardware. Both lens are in really...
    • Galant665
    • Updated:
Back
Top